Umbriano Paving Stones RockingI always enjoy going out and meeting with homeowners and discussing their projects with them. It’s always fun talking about their hopes and dreams for a certain area,  whether it be a new front entrance, driveway or backyard patio. The goals for these projects are usually very personal and it’s a process to come up with ideas or a design to solve specific problems, than to work through the material selections. This project was a little less visionary but just as important to this homeowner, getting their driveway fixed and not having to go through the same process two or three years from now.

 

The homeowner on this project simply wanted to have a driveway that didn’t rock. But isn’t that what we really want? We all want driveways that rock. When people walk by, they give us compliments, hey, your driveway rocks! That sounds like a pretty good position to be in. That’s not exactly the correct description for this driveway, when I was looking at this driveway, the large Umbriano stones, 24”x24”, didn’t look right (see picture below). One stone was sticking up about 1”, I put my foot on one corner and pressed down with my foot, I watched the other corner rise up. I repeated this motion several times and this large stone rocked back and forth like a teeter totter. (see pictures below)

Wobbly Umbriano Driveway This joint size is too big Not very level Ineffective edge restraints Ineffective edge restraints

There’s no way these stones would have been installed this way. I’m sure when they were installed they stones were put in level, what happened? This pavement installation would definitely be in the failure category. This installation was about 5 years old and this driveway was already fixed once. I had to put my sherlock Holmes hat on and start investigating. After some investigation the root cause for this failure really comes down to not following the industry’s published best practices.

 Problem #1 Edge Restraints

 If you look at the pictures above I included one of the edge. The previous installers used a mortar edge, with our freeze/thaw climate they become ineffective within a few seasons. The proof is in the pudding as they say and this type of edge restraint simply doesn’t work long term. Edge restraints that work well long term are poured in place concrete curbs or a plastic edging. We prefer Snap-Edge and have had excellent results with it.

 Problem #2 Limestone Screenings/Stone Dust

After the edge restraints failed on this driveway the Umbriano stones started to creep out towards the edge. The joints increased in size and any joint sand was washed away. What happens at this point is rather interesting and I haven’t seen a driveway in such a short amount of time react quite this way. When the joints start to open, excess water will work it’s way in the the base material. The base will become supersaturated and the fines/dust will start to be squished out. This is usually referred to as, ‘pumping out the fines.’  As the fines in the bedding layer start to get washed away with repeated vehicular traffic this will cause a depression on either end of the paving stones.  There is no vertical interlock and as time passes the paving stones will start to rock back and forth as in the picture above. Here is a video I shot, showing the problems as described.


Now that we know the problems, how do we fix this?

After consulting with the client, two options were presented. The first option presented was to do a simple repair, consisting of pulling up the stones, levelling the bedding layer and re-installing the pavers and also replacing any broken or heavily chipped stones. And let’s not forget installing edge restraints that work in freeze thaw climates.  Option two was the one actually given the green light, the more expensive of the two options. Option two consisted of pulling up the Umbriano stones, setting them aside digging out all the old material and replacing it with something very different.

 Ultrabase - The hero of the day

 After the stones were set aside, approx 12” of material was removed from the site. Approx 2” - 3” or ¾” clear stone was brought in, compacted and leveled. After this step, our hero arrived. Ultrabase/RCC. I have a full article on just what  Ultrabase is, I have that here. In short, this base material is similar to gravel but contains portland cement and an air entrainment additive, it’s not concrete but it’s not gravel either. This base material is perfect for single car width driveways where deformation from tire tracks (rutting) are a problem, especially with the heavy clay soils in Toronto. We have been using this material with great success over the past several years. I’m not saying we’ll never install a traditional base for our driveway installations but Ultrabase is slowly becoming our go to solution for interlocking paving stone driveways in Toronto.

 Lessons learned - The Last Word

 With the advancements of interlocking paving stones in terms of colour, textures and design within the last 10 years. Advanced base techniques using Ultrabase and/or geosynthetic products. Great edge restraints and some pretty incredible advancements in polymeric sand, Interlocking Paving Stone Driveways are making a comeback. Beauty and longevity can be achieved. Still, with all these great products it all comes down to the installation. This is as they say where the rubber meets the road. Use of the industry best practices is a must, experience and a proven track record are a good place in choosing a contractor.

Paving Stones: Unilock Umbriano , Winter marvel 24” x 24”

Edge Restraint: Snap-Edge

Ultrabase: Parkview Building Supplies, Toronto

Polymeric Sand: Unilock/Techniseal RG+

Location: Toronto

Heavy 2' x 2' stones It's time to dig Stone base Ultrabase installed Heavy 2' x 2' stones

About the Author

Garry Reisky

garry reisky hardscaperGarry Reisky is the owner of Terraform Contracting. A Unilock Authorized Contractor located in Toronto, Ontario. Terraform designs and installs residential hardscape and landscape creations. Garry is a hardscape expert with extensive installation and product knowledge. Garry is an unofficial Rock(et) Scientest and self proclaimed guru of everything EuduraColor. Find Garry on Google+. Tired of dealing with inexperienced contractors, Contact Garry for a free estimate.

More articles from this author